![]() ![]() The primer must be brushed out well or the product will create a film on the surface. The established woodwork must be finally treated with the desired product as soon as possible and within 3 months at the latest.īrush bare woodwork with one coat of Visir Pigmented Primer. Remember to coat all ends grains (3-4 coats wet-on-wet). Do not brush across the coating but apply Visir Pigmented Primer in the longitudinal direction of the coating. Jotun anbefaler at man i tillæg til Teknisk Datablad (TDS) også ser på Sikkerhedsdatablad (SDS) for dette produkt. Udgivelsesdato: Side: 2/3 Dette tekniske datablad erstatter alle tidligere udgaver. Use a primer brush and avoid dry brushing. Vinduer rengøres med JOTUN 2-i-1 Kraftvask/Træ- og Murrens. ![]() The primer must be brushed out thoroughly. Substrates treated with linseed oil and stains containing linseed oil must be cleaned down to the bare woodwork, as linseed oil can cause blister formation when treated with stains or paints.īefore or immediately after installation treat with a brush coat of Visir Pigmented Primer. Remove loose paint and loose wood fibres by wire brushing before applying a suitable disinfectant. VISIR Pigmented Primer is a water repellent primer to prolong the durability of Demidekk Infinity for windows & doors and Demidekk Ultimate for Cladding, Log Cabin, Decking, Fencing and other exterior. Suitable for Demidekk Infinity and Demidekk Ultimate. Previously Treated Surfaces: Clean with a suitable detergent. Ideal for Impregnated and Weathered Exterior Wood. Vacuum impregnated windows must be degreased and all sharp edges rounded before the primer is applied. New Woodwork: Substrates that have been untreated for more than 4 weeks must be cleaned and loose wood fibres must be removed by sanding or wire brushing. Substrates must be sound, clean and dry before starting treatment. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |